EnglishEnglish DeutschDeutsch españolespañol 中文

Can a machining center install a digital or numerical control system?

The so-called “digital display” refers to the installation of a grating ruler on the machine tool, which can detect the movement distance of the machine tool in real time. The high-end point can detect the rotation speed, the load, the movement clearance of the screw, etc., but the operation still needs to complete the CNC manually, that is, the machine tool. The cnc system is installed on the mac...

Tags : CNC machine center vertical machine center double column machine center

What are the factors causing the tool imbalance in the CNC machining center?

In the use of CNC machining centers, tool imbalance may occur. If you do not adjust it in time, it will affect the processing results. Therefore, we must always pay attention to whether the NC machining center tool balance. What is the main reason for the imbalance of the handle? The main reasons for CNC machining are the asymmetry of tool design, defects in the tool body, and all adjustments on t...

Tags : CNC machine center vertical machine center horizontal machine center

CNC machining center spindle how to repair?

About the CNC machining center spindle maintenance related knowledge, the specific circumstances let Xiaobian explain to everyone. CNC spindle maintenance direction: The accuracy of the electric spindle is restored, the spindle bearing is replaced, the blocked water channel is cleaned, the electric spindle coil is replaced, and the electric spindle and stator are replaced. The market price of elec...

Tags : CNC machine center vertical machine center double column machine center

What are the differences between the line rails and hard rails of CNC machine tools?

The line rails and the hard rails are all linear movements on the machine tool, such as the movement of the table and the headstock. Tracks usually refer to rolling guides, often referred to as "linear guides". The linear guide itself is divided into two parts: the slide rail and the slider. Inside the slider there are internal circulating balls or rollers. The length of the slide can be customize...

Tags : CNC machine center vertical machine center double column machine center

What advantage does CNC machining center have over ordinary CNC machine tools?

1. What advantage does CNC machining center have over ordinary CNC machine tools? Cnc machining centers have the following advantages over ordinary CNC machines: 1. To reduce the number of machine tools, easy to manage, for a multi-processing parts as long as a CNC machining center can complete all the processing. 2. Because the workpiece can be completed with only one clamping process, it can avo...

Tags : CNC machine center vertical machine center double column machine center

What kind of workpiece is suitable for CNC machining?

Since CNC lathes can not only reduce personnel costs, they can also reduce the defective rate of goods, and can also process cluttered parts with good precision. Therefore, some general-purpose machine tools cannot be processed because they need to be processed by CNC machine tools. There is also a general-purpose machine tool. Difficult-to-machine and difficult-to-guaranteed CNC machine tools can...

Tags : CNC machine center vertical machine center horizontal machine center

What can be done if the workpiece has quality problems through CNC lathe machining?

CNC lathe is the product of the development of science and technology, which brings more convenience to the workpiece processing. However, during the processing, the workpiece will also have a variety of quality problems. Please let the CNC lathe manufacturer provide you with solutions. The batch processing of workpieces is a superiority of CNC lathe manufacturers, but the occasional poor workpiec...

Tags : CNC machine center vertical machine center horizontal machine center

How to deal with the abnormality of CNC oil pressure system?

1, the oil pump does not spray The main reason may be the low level of oil in the oil tank of the Dongguan CNC machine tool, the oil pump reversed, the speed is too low, the oil viscosity is too high, the oil temperature is low, the filter is clogged, the volume of the suction pipe is too large, and the intake port sucks air. Shafts and rotors are damaged, etc. There are corresponding solutions to...

Tags : CNC machine center vertical machine centers horizontal machine centers

Which spindle is better for CNC machining centers?

The spindle classification of cnc machining center has many methods, and different countries have different classification standards. However, the classification standards used in Japan are classified according to the taper of the spindle. For example, the taper of BT60, BT50, BT40 and BT30 is 7:24. The spindle model number, the value behind the BT is the size of the taper interface diameter repre...

1 2 3 4 5 6 >>

Cooperation

Phone : +(86) 0592-7362548; Customer Service : + (86) 400-703-2277; Fax : 0592-7362540; Address : 260 Tongji North St, Xiamen, Fujian, China; Sales Email: info@takam.com.cn; Service Email : service@takam.com.cn; Website : www.takam.com

Get In Touch