EnglishEnglish DeutschDeutsch españolespañol 中文

Which spindle is better for CNC machining centers?

The spindle classification of cnc machining center has many methods, and different countries have different classification standards. However, the classification standards used in Japan are classified according to the taper of the spindle. For example, the taper of BT60, BT50, BT40 and BT30 is 7:24. The spindle model number, the value behind the BT is the size of the taper interface diameter repre...

What is the cycle of a CNC machining center?

Circulation refers to the process sub-degree used in a particular machining process, such as drilling, bad material cutting, or thread cutting, and these cycles can be applied to various specific machining processes as long as the parameters are changed. The system is equipped with several standard cycles for turning milling. 1.Standard Loop Overview LCYC95 Blank Cycle LCYC93 thread cycle 2. Use o...

What advantage does CNC machining center have compare to ordinary CNC machine tools?

CNC machining centers have the following advantages over ordinary CNC machines: 1. To reduce the number of machine tools, easy to manage, for the processing of more parts as long as a CNC machining center can complete all the processing. 2. Because the workpiece can be completed with only one clamping process, it can avoid the positioning error caused by the workpiece being clamped several times i...

The difference between CNC machining center and ordinary CNC machine tool

The biggest difference between CNC machining centers and ordinary CNC machine tools is that CNC machining centers have one more tool magazine and tool changer than CNC machine tools. CNC machining center further improved the degree of automation and production efficiency of ordinary CNC machine tools. The most specific difference between the CNC machining center and general CNC machine tools is th...

How to check the vertical machining center's working accuracy?

The material of the test piece, cutting tool and cutting parameters are selected according to the agreement between the manufacturer and the user and should be recorded. The recommended cutting parameters are as follows: Cutting speed: cast iron parts approx. 50m/min; aluminium parts approx. 300m/min. Feed rate: approximately (0.05 to 0.10) mm/tooth. Depth of cut: The depth of cut for all milling ...

CNC vertical machining center how to verify the processing trajectory?

CNC vertical machining center can use trajectory simulation to simulate the tool along the trajectory, reproduce the rough cutting of the dynamic image display process to simulate the actual cutting process and results to determine the accuracy of the tool path. This simulation process is implemented by the trajectory simulator. After the user picks up the relevant trajectory through the trajector...

Tags : CNC vertical machining center Vertical Machining Centers CNC Vertical Machine Center

What can drilling center do?

The drilling and attack center can also be used to machine precision metal parts, but there is no high-speed machining center specialty. The drilling and attack center is more processed products, such as 3C industry products, mobile phones, digital cameras and other electronic products, shells or components, and some Aluminum production. The drilling and tapping center is more adept at drilling an...

What are the materials suitable for processing in the machining center?

There are many materials suitable for machine tools in machining centers, such as 45# Gang, aluminum alloy, copper, aluminum, stainless steel, iron, composite material processing centers are suitable for processing, there are many small series will not be introduced one by one, some hardness is very High material processing centers can also be processed, but the premise is that the hardness of the...

Tags : machining centers CNC milling machine

What’s called CNC machine center

Simple to say: that is, CNC machine tools, CNC milling machine without knife called (Guangdong called computer gongs.) A knife called the machining center. Also called CNC Complex point: CNC (numerical control machine) is the abbreviation of computer numerical control machine (Computer numerical control), is a kind of automatic machine tool with program control system. The control system can logic...

Tags : CNC milling machine CNC machine center

<< 1 2 3 4 5 6 7 8 9 10 >>

Cooperation

Phone : +(86) 0592-7362548; Customer Service : + (86) 400-703-2277; Fax : 0592-7362540; Address : 260 Tongji North St, Xiamen, Fujian, China; Sales Email: info@takam.com.cn; Service Email : service@takam.com.cn; Website : www.takam.com

Get In Touch