EnglishEnglish DeutschDeutsch españolespañol 中文

How to choose the controller system of CNC machining center?

The CNC system of the machining center is a topic that the machining center has never tired of, and a good part of the performance of a machining center depends on the performance of the CNC system. Therefore, the position of the CNC system in the machining center is almost impossible to compare with it. Parts that customers value very much. There are many brands of CNC systems, and each different...

What is the Main Function of Machining Center?

Machining center is developed from the CNC machine tools, and the biggest difference between CNC machine tools is the machining center with the ability to automatically exchange tooling, through the tool in the magazine to install different uses, in a folder through the automatic tool changer Change the machining tool on the spindle, to achieve a variety of processing functions. Machining center i...

Tags : CNC Machining Center CNC milling machine

What are the Characteristics of CNC Machining Center?

First, to achieve more than three-axis or three-axis linkage control to ensure that the tool for complex surface processing. In addition to the machining center with linear interpolation and circular interpolation, but also has a variety of processing canned cycle, the automatic tool radius compensation, tool length automatic compensation, graphics processing graphics, man-machine dialogue, automa...

Tags : CNC milling machine Vertical machining center Horizontal machining center

The Reason that the CNC Lathe is Unstable

The reason that the CNC lathe is unstable is as follows: The connection between the servo motor shaft and the lead screw is loose, causing the lead screw pre-motor to be out of synchronization with the dimension error. Just check the servo motor and screw shaft coupling mark. Moving the stage (or turret) back and forth at a faster rate results in significant relative movement of the two ends of th...

Tags : CNC Lathes Slant Bed Lathes 2 Axis CNC Lathe

The Main Feature of CNC Machine Center

Machining center is developed from the CNC machine tools, and the biggest difference between CNC machine tools is the machining center with the ability to automatically exchange tooling, through the tool in the magazine to install different uses, in a folder through the automatic tool changer Change the machining tool on the spindle, to achieve a variety of processing functions. Machining center i...

Tags : CNC Machining Center CNC milling machine

Machining Centers and CNC Milling Machine Which is Better?

Machining centers and CNC milling machine which is better? This issue can not be a word. They have their own advantages and have long-term domestic and international markets. Benefit from the national revitalization of the equipment manufacturing industry environment and strong market demand-driven, the domestic milling machine tool industry has seen rapid technological development, investment ent...

Tags : CNC machining center CNC milling machine

How to Verify the Processing Trajectory of CNC Vertical Machining Center?

CNC vertical machining center can simulate the path through the trajectory simulation tool to reproduce the rough cutting dynamic image display process to simulate the actual cutting process and the results to determine the correctness of the tool path. This simulation process is achieved through the trajectory simulator, the user through the trajectory simulation command to pick up the relevant t...

Tags : CNC vertical machining center

How to operate the drilling and tapping center safely?

In the operation of drilling and tapping center always encounter such trouble, big or small, vary in severity, how to safely operate drilling and tapping center, operating drilling attack process what are the precautions, each operator Need to care about the problem. Drilling and tapping center operation precautions 1, the operator to go through the system training, familiar with the structure and...

Tags : drilling and tapping center drilling tapping machining center drilling and tapping machining center

Why do machine cutting need cutting fluid?

Metal processing methods, including cutting is the most common metal processing, the most widely used one. The use of cutting fluid plays an important role in metal cutting. In the metal cutting process, the tool and the workpiece, the interface between the cutter and the chip have a great friction, cutting force, cutting heat and workpiece deformation increases, resulting in tool wear and tear, b...

<< 1 2 3 4 5 6 7 8 9 10 >>

Cooperation

Phone : +(86) 0592-7362548; Customer Service : + (86) 400-703-2277; Fax : 0592-7362540; Address : 260 Tongji North St, Xiamen, Fujian, China; Sales Email: info@takam.com.cn; Service Email : service@takam.com.cn; Website : www.takam.com

Get In Touch