EnglishEnglish DeutschDeutsch españolespañol 中文

Product Details


Auto pallet change


High-Speed CNC Vertical Auto Pallet Change Machining Center

With global demand increasing, limited factory floor space and shortage of labor force.

Many companies have been looking for solutions that can help with these increasing problems.

Takam M-ONE APC Series (Auto Pallet Change) vertical machine center is the best solution for 

this type of needs. With the M-ONE APC Series gets 25% to 60% increase in productivity compare

to only one machine working. By not stopping the machine after every machining cycle, this

machine can work non-stop while the work-piece is getting changed. 

 CNC Vertical Machine

 Body Structure

 

The M-ONE APC is desgined with the perfect platform, no matter

what the project is the soundnessof the structure is determined

by the sturdiness of the foundation. The same principle applies 

to our APC machining centers. The machine structure is also made

from high grade cast iron. It is reinforced with heavy ribs to resist

vibration and damping. Also, the widestance design allows maximum

loading for the machine.

Table Change Time 

 

When every second counts, a fast table change is very 

important. The M-ONE APC (Auto Pallet Change) fast table 

change is what we do. Our table change time from the 

moment of lift off with complete 180 degree turn only 

takes less than 7 seconds decreasing production time.  

 

 Milling machine

 

 Vertical Machine Center

Operating Panel 

 

The M-ONE APC Series operating panel was designed 

with the comfort of the operator in mind. Since this 

machine was designed to operate for long working 

hours, the operating panel can be rotated left to right 

and up and down to the maximum comfort of the 

operator. 

Vertical Machine Center Manufacture

High Efficiency CNC Machine
Machine Data Specifications

Subject
Unit
Size
Work table size
MM
1000×500
Machining area
MM
1000×500
Number of pallet   Piece  2
T Slot
MM
100×5×18
Max weight on work table
KG
300×2
X/Y/Z Axis travel
MM
1000/500/600
Spindle nose to work table surface
MM
150-750
Spindle taper  
 
ISO40
Spindle RPM
RPM
8000
Spindle delivery type 
 
Belt
Spindle motor 
KW/HP
11
Axis motor(Mitsubishi)
KW
2.0/2.0/3.5
Axis motor(Fanuc)
KW
2.5/2.5/2.5
Cutting feed rate(X/Y/Z Axis)
MM/min
1-12000
Rapid feed rate(X/Y/Z Axis)
M/min
24/24/24(36)
Position accuracy
MM
±0.005
Repeatability
MM
±0.003
Air requirement
KG/cm2
6
Cooling pump
HP
3/4
Voltage requirement
KVA
25
Machine Weight 
KG
7500
Exterior size(L×W×H)
MM
3660×5160×3300

Previous :Vertical Machine Center M-ONE 8 APC

Inquiry Now

Have a question? You can call us or Email us by sending a message below.

Subject : Vertical Machine Center M-ONE 10 APC

Cooperation

Phone : +(86) 0592-7362548; Customer Service : + (86) 400-703-2277; Fax : 0592-7362540; Address : 260 Tongji North St, Xiamen, Fujian, China; Sales Email: info@takam.com.cn; Service Email : service@takam.com.cn; Website : www.takam.com

Get In Touch