With globe demand increasing, limited factory floor space, and shortage of labor force. Many companies have been looking for solutions that can help with these increasing problems. Look no further, Takam Machinery once again has the solution to increase production with the uses of smaller limited factory floor space.With M-one Series get 25% to 60% increase in productivity from one machine.By not having to stop the machine after every machine cycle, this machine can work non-stop while you are changing your work pieces. Not only can this machine increase your productivity, it can also decrease the usage of your plant floor. The M-one series machine only needs an extra 30% of your floor space compare to a standard vertical maching center. Takam machinery once again brings the M-one series machining center with “endless innovation”.
Subject Unit Size Work table size MM 800×500 Machining area MM 650×500 T Slot MM 100×18×5 Max weight on work table KG 600 X/Y/Z Axis travel MM 650/500/550 Spindle nose to work table surface MM 150-700 Spindle taper BT/ISO/CAT40 Spindle RPM RPM 10000 Spindle delivery type Belt Spindle motor KW/HP 7.5 Axis motor（Mitsubishi） KW 1.5/1.5/3.0 Axis motor（Fanuc） KW 1.8/1.8/3.0 Cutting feed rate（X/Y/Z Axis） MM/min 1-10000 Rapid feed rate（X/Y/Z Axis） M/min 48/48/48 Position accuracy MM ±0.005 Repeatability MM ±0.003 Air requirement KG/cm2 6 Cooling pump HP 3/4 Voltage requirement KVA 17 Machine Weight KG 4000 Exterior size（L×W×H） MM 2420×2180×2700
Previous :Vertical Machine Center M-ONE11
Have a question? You can call us or Email us by sending a message below.
Phone : +(86) 0592-7362548; Customer Service : + (86) 400-703-2277; Fax : 0592-7362540; Address : 260 Tongji North St, Xiamen, Fujian, China; Sales Email: email@example.com; Service Email : firstname.lastname@example.org; Website : www.takam.com